Portland cement with additives in class 42.5 according to PN-EN 197-1
WE CARE ABOUT THE ENVIRONMENT
Zbych-Pol & Mobet Sp. z o.o. is also a manufacturer of ready-mixed concrete with an extensive offer adapted to market needs. We hold the National Certificate of Conformity of Factory Production Control for ready-mixed concrete issued by the Institute of Ceramics and Building Materials 008-UWB-31/ZKP/18, the ISO 9001:2015 certificate and the “Dobry Beton” (Good Concrete) certificate, which proves the highest quality control of concrete mixes produced in accordance with the PN-EN 206+A2:2021-08 standard. The use of raw materials with the required quality certificates and waste-free production technology enables the production of environmentally friendly concrete in accordance with the requirements of the Environment Protection Law. Our production facility is equipped with innovative, automated, computer-controlled concrete batching plants. Constant monitoring carried out by the company’s own laboratory and calibration of measuring devices allow for precise and repeatable quality of the manufactured product to the highest standards.
READY-MIXED CONCRETE
High product quality with minimal impact on the environment
The production of mixes, throughout the entire technological process, has been designed in such a way as to minimise the environmental impact. This is due to the use of high quality cements and mineral additives, water and aggregates recycling, while meeting all the required concrete parameters.
Zbych-Pol & Mobet has in its offer ready-mixed concrete of all strength classes indicated in PN-EN 206+A2:2021-08, C8/10 to C55/67 and the required exposure classes and consistencies from S1 to S5, according to the customer’s requirements, ensures easy pouring of the mix using traditional consolidation methods. Technological support is also provided for the entire concrete process, from advice and selection of the right concrete, through transport, pouring, consolidation and care, as well as testing of concrete in our laboratory (testing of raw materials, concrete mixes and cured concrete) and on the construction site.
Concrete mix formulas have been designed to meet specific requirements, strength, exposure classes, i.e. durability, consistency, density, corrosion protection of steel in concrete, taking into account transport time and pouring works. Concrete mixtures have a wide range of applications in the construction industry (foundations of footings, walls, stairs, floors, tie beams, columns).
Certified raw materials are used for the production of regular concretes:
SPECIAL CONCRETES
Stabilisations, cement and sand beds, cement-stabilised mixes, lean concrete
Basic technical specifications:
Certified raw materials are used for the production of stabilisations, lean concretes and beds:
Stabilisations and lean concrete produced using ingredients compliant with the Polish Standards.
They are a product which, after hardening, is a part of the load-bearing part of the road surface, used to transfer traffic loads to the ground. At the design stage, it is important to determine the optimum water content of the mix, which will ensure that the maximum density of the soil structure is achieved. The degree of consolidation during pouring is also very important. The main applications are foundations for car park, yard, road surfaces (auxiliary and primary foundations).
Sand and cement beds
Sand and cement beds are used as a levelling substrate for elements of small architecture, under cobblestones, pavements, curbs.